The Moisturizing Fluid For All Print Heads

What is Printhead Moisturizing Liquid?

If You Are Unable To Use Your Printer For A Variety Of Reasons, You Will Want This Moisturizing Liquid To Protect Your Print Head And Keep It From Clogging.

1. After Cleaning The Print Head, Inject A Moisturizing Liquid To Keep It From Drying Out And Keep It Non-drying For 3-6 Months.

2. After Each Use Of The Printer, Pump Moisturizing Liquid Into To The Capping Station To Keep The Ink And Head From Drying Out.

Product description:

The Moisturizing Fluid Is Suitable For: All Print Heads, Including: Epson, Seiko, Ricoh, Hp, Canon, Brother, Etc. Print Heads.

500ml Cleaning, Or 1L Cleaning, Or 1L Moisturizing.

Product Description:if You Need To Go Out For A Holiday, Or Go On A Business Trip, Or Travel, You Cannot Use A Uv Printer For Various Reasons, Then You Need This Special Cleaning Liquid And Moisturizing Liquid To Protect Your Print Head And Prevent It From Clogging. The Advantages Are As Follows:

Uv Ink Special Cleaning Liquid:strong Cleaning, Decomposing Uv Ink, Because It Is Too Strong, It Is Best Not To Exceed 30 Minutes, Otherwise It Will Damage The Print Head.

Print Head Moisturizing Liquid:after Cleaning The Print Head, Inject Moisturizing Liquid To Protect The Print Head From Drying, And Effectively Maintain Non-drying For 3-6 Months. (according To Weather Temperature And Humidity, Moisturizing For At Least 3 Months)

Instructions For Use:

1. The Syringe Is Connected To A Hose, Suck A Proper Amount Of Uv-specific Cleaning Liquid To Clean Each Nozzle Of The Print Head Until It Is Clean To No Color, And Then Drain The Remaining Liquid In Each Nozzle.

2. The Syringe Is Connected To A Hose, And The Moisturizing Liquid Is Injected Into Each Nozzle, And Only 0.5ml Of Each Nozzle Is Needed. The Moisturizing Liquid Does Not Need To Be Injected Too Much, As Long As It Can Achieve The Moisturizing Effect.

Note: The Print Head Is For Display Only, Not In The Packing List.